Iranian greenhouse type C with a special design with guarantee and calculation book
Iranian Type C greenhouse with a special design (and has a calculation book and warranty) is a structure with more strength and durability than the prefabricated Iranian type C structure.
This greenhouse structure is designed in two gothic and circular styles with a multi-span and portable structure and is more resistant, taller and better ventilated than other types of Iranian and tunnel greenhouses.
Technical information:
Roof Coatings: UV Plastic grade 1
Arc form: circular or gothic
Body cover: UV Plastic or polycarbonate
Up Height: 6 m
Structural Resistance: Wind 120 km / h — snow 45 kn / m2
The distance between the arcs: 3 m
Mazrae Bekr Company is one of the few greenhouse companies in Iran that, by designing the specific types of greenhouse structures by the relevant software, not only provides a prefabricated structure but also offers the most economical structure.
The structure of Iranian greenhouses type C and other types of greenhouses in Mazrae Bekr Company is designed according to the topography, climate, type of soil, etc. of each region. Structures are designed and made with the best and most durable materials according to the standards and regulations of the United States, Iran and the European Union.
It should be mentioned again that the Iranian greenhouse type C with calculation and software design, has a calculation book and guarantee
Specifications of Iranian greenhouse design C
The roof coating is made of polyethylene with 5, 8 and 10% UV and additives such as IR, LD, EVA, etc. The side walls are designed up to 100 cm of concrete wall and then with polycarbonate, depending on the conditions of the area.
In type C of Iranian greenhouses, the pillars are made of hot galvanized profiles 80 * 80 with a distance of 3 meters from each other and a height of 3, 5, 4, 4, 5 and 5 meters. The diameter of the arches is 50 mm, the gutters are made of hot-dip galvanized sheets with a thickness of 2 mm with 5 bends. According to the climate of the region and the area of the greenhouse, will be calculated and designed by the software.
The roof valves of these structures are about 15-20% of the roof and are made of hot galvanized pipe 32 with rack, pinion and manual and electric gearbox. The power transfer from the gearbox motor to the pinions is done by hot-dip galvanized pipe 32 and the side valves in Two models of roll-up (manual and electric) or with rack and pinion, run.
The advantages of this style of greenhouses
- Reasonable price
- High strength
- Iranian greenhouse has the ability to install plastic coat on the walls.
- It has a waiting room and wiring under the roof and the door of the tractor has an electric shutter
- It can be converted into several separate units for different cultures.
- Due to its suitable height, it is generally used for both soil and hydroponic cultivation methods.
Contact us for more information and to discuss various types of greenhouse structures.
